4 EDITING FUNCTIONS
90 Book Center Erase
Book Center Erase
You can whiten the center of the copied image when a shadow-like part appears on it. This function is called
“book center erase”. It is useful when you copy book-type originals.
1
Place paper in the drawer(s).
When using bypass copying, be sure to set the paper size.
2
Select the drawer for the desired paper size.
3
Press [BOOK CENTER ERASE] on the EDIT menu.
4
Adjust the width of the part to be erased.
1) Press either [ 2 mm] (0.08") or [ 50 mm] (1.97").
2) Press [OK].
Book center erase set
No setting
To Next Page
Loading...
