2 HOW TO MAKE COPIES
42 Bypass Copying
Copying on other than the above standard sizes of paper
1
Place the original(s) and paper in the same procedure noted in steps 1 and 2 in
“Copying on A3, A4, B4 and B5 size paper (in equipment other than for North America)
/ LD, LT, LG and ST-R size paper (in equipment for North America)” ( P. 3 9 )
2
Press [SIZE SETTING] on the touch panel.
3
Press the button of the same size as the paper you placed on the bypass tray.
The selected size will be registered as an “OTHER” size.
4
Press [OTHER] under “COPY”.
The paper size is now set to the one registered as “OTHER” size.
If the paper size is not selected in this step, copying may be slowed down.
To Next Page
Loading...
