3.BASIC COPY MODES
Enlargement and Reduction Copying 57
3 BASIC COPY MODES
3
Select the desired paper size, press [AMS] and then [OK].
y If you want to select a paper size other than the following, you need to register the size as
“OTHER”. Once you register this size, it will be specified every time you press [OTHER] on the
touch panel.
North America: LD, LG, LT, ST
Other than North America: A3, A4, B4, B5
For how to register, see the following page:
P.59 “Registering paper sizes to “OTHER” size”
y Paper sizes can also be registered by pressing the desired drawer button of the equipment
status indication area on the BASIC menu.
4
Place the original(s).
If the original is placed on the original glass, the reproduction ratio is set when the original is placed. If
the original is placed on the RADF, the reproduction ratio is set when the original is scanned.
If “Change direction of original” appears, change it accordingly.
5
Select other copy modes as required, and then press the [START] button on the control
panel.
To Next Page
Loading...
