Toshiba ESTUDIO355 - Page 43

41
5
Setup Flow for Raw TCP/LPR Printing
This equipment can be used with Raw TCP or LPR printer connection for Windows NT 4.0, Windows
2000, Windows XP, Windows Server 2003 and Windows Vista. Raw TCP or LPR printing is the common
method to setting up the printer from servers.
Setup Flow Description/Reference
Connect this equip-
ment
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
• Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP
(IPv4)
Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
• Chapter 4 “SETTING ITEMS (ADMIN)”
“3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide
• Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the TCP/IP”
Set up the IPv6 Assign the IP address, Prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE
• Chapter 4 “SETTING ITEMS (ADMIN)”
“3. SETTING NETWORK FUNCTIONS”
“Setting the IPv6 Protocol”
Reference: TopAccess Guide
• Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the IPv6”
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Windows Vista
Connecting over TCP/IP Network
Setting up the Raw TCP
or LPR printer connection

Ð

Ð
Ð

Ð

Ð
Ð
