Toshiba ESTUDIO355 - Setup Flow for Remote Scan

71
5
Setup Flow for Remote Scan
This equipment provides the Remote Scan driver that allows users to operate scanning remotely from the
Windows computer and import the scanned images into a TWAIN-compliant application.
The Remote Scan driver can connect to this equipment over TCP/IP network.
Setup Flow Description/Reference
Connect this equip-
ment
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
• Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP
(IPv4)
Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
• Chapter 4 “SETTING ITEMS (ADMIN)”
“3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide
• Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the TCP/IP”
Set up the IPv6 Assign the IP address, Prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE
• Chapter 4 “SETTING ITEMS (ADMIN)”
“3. SETTING NETWORK FUNCTIONS”
“Setting the IPv6 Protocol”
Reference: TopAccess Guide
• Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the IPv6”
Install the Client Soft-
ware
Install the Remote Scan driver from the Client Utilities CD-ROM.
Reference: Scanning Guide
• Chapter 8 “REMOTE SCAN”
“Installing Remote Scan Driver”
Connecting over TCP/IP Network
Remotely operate scanning
using Remote Scan driver
Retrieve scanned images
into TWAIN compatible application
Originals
Windows 2000
Windows XP
Windows Server 2003
Windows Vista

Ð

Ð
Ð

Ð

Ð
Ð

