Toshiba ESTUDIO355 - Setup Flow for FTP Printing

63
5
Setup Flow for FTP Printing
FTP printing allows users to send a print file using the FTP protocol from anywhere you can access to this
equipment.
This equipment supports FTP printing which enables to print a file sent through FTP protocol. Users can
send a print file using the FTP download tools to this equipment from any operating systems.
This equipment can print following files using the FTP printing:
• PCL format print job file
• PostScript Level 3 print job file
• Text data file
Setup Flow Description/Reference
Connect this equip-
ment
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
• Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP
(IPv4)
Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
• Chapter 4 “SETTING ITEMS (ADMIN)”
“3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide
• Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the TCP/IP”
Set up the IPv6 Assign the IP address, Prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE
• Chapter 4 “SETTING ITEMS (ADMIN)”
“3. SETTING NETWORK FUNCTIONS”
“Setting the IPv6 Protocol”
Reference: TopAccess Guide
• Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the IPv6”
Connecting over TCP/IP Network
Sending a print file
using FTP

Ð

Ð
Ð

Ð

Ð
Ð
