55
5
Setup Flow for IPP Printing
This equipment can be used with the IPP printer connection for Mac OS X in a TCP/IP network using
CUPS. Even though IPP printing can be used in a local area network, this method is commonly used to
print over the Internet. If you allow IPP printing through the Internet, you must configure the DNS server to
enable users to access this equipment over the Internet using the HTTP protocol. This is useful when
users want to print to this equipment from outside the local area network.
IPP printing for Macintosh is available for Mac OS X 10.2.4 to 10.4.x.
Setup Flow Description/Reference
Connect this equip-
ment
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
• Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP
(IPv4)
Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
• Chapter 4 “SETTING ITEMS (ADMIN)”
“3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide
• Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the TCP/IP”
Mac OS X
Connecting over TCP/IP Network
Setting up the IPP
printer connection
Ð
Ð
Ð
To Next Page
Loading...
