Toshiba G9 ASD - Page 53

G9 ASD Quick Start Guide 45
SPECIAL
Crane/Hoist Settings
Switching Load Torque During Power Running F335
Heavy Load Torque During Power Running F336
Heavy Load Torque During Constant Power Running F337
Switching Load Torque During Regeneration Braking F338
V/f 5-Point Setting
V/f 5-Point Setting Frequency 1 F190
V/f 5-Point Setting Voltage 1 F191
V/f 5-Point Setting Frequency 2 F192
V/f 5-Point Setting Voltage 2 F193
V/f 5-Point Setting Frequency 3 F194
V/f 5-Point Setting Voltage 3 F195
V/f 5-Point Setting Frequency 4 F196
V/f 5-Point Setting Voltage 4 F197
V/f 5-Point Setting Frequency 5 F198
V/f 5-Point Setting Voltage 5 F199
Frequency Control
Start Frequency F240
Run Frequency F241
Run Frequency Hysteresis F242
End Frequency F243
Special Parameters
0 Hz Dead Band Signal F244
0 Hz Command Output F255
Exciting Strengthening Coefficient F415
Annual Average Ambient Temperature F634
Rush Current Suppression Relay Activation Time F635
PTC 1 Thermal Selection F637
PTC 2 Thermal Selection F638
Jump Frequencies
Jump Frequency 1 F270
Jump Frequency 1 Bandwidth F271
Jump Frequency 2 F272
Jump Frequency 2 Bandwidth F273
Jump Frequency 3 F274
Program Mode Menu Navigation
Primary Menu Sub Menu Parameter Name
Parameter
Number
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net