Toshiba G9 ASD - Page 54

46 G9 ASD Quick Start Guide
SPECIAL
Jump Frequencies
Jump Frequency 3 Bandwidth F275
Operation Panel
Parameters
Operation Command Clear Selection With Standby
Terminal Off
F719
Panel Stop Pattern F721
Panel Torque Command F725
Panel Tension Torque Bias F727
Panel Load Sharing Gain F728
Panel Override Multiplication Gain F729
Panel Frequency Lockout F730
Panel Emergency Off Lockout F734
Panel Reset Lockout F735
Traverse
Traverse Selection F980
Traverse Acceleration Time F981
Traverse Deceleration Time F982
Traverse Step F983
Traverse Jump Step F984
MOTOR
Motor
Motor Set 2
Motor Set 2 Base Frequency F170
Motor Set 2 Base Frequency Voltage F171
Motor Set 2 Manual Torque Boost F172
Motor Set 2 Overload Protection Level F173
Motor Set 3
Motor Set 3 Base Frequency F174
Motor Set 3 Base Frequency Voltage F175
Motor Set 3 Manual Torque Boost F176
Motor Set 3 Overload Protection Level F177
Motor Set 4
Motor Set 4 Base Frequency F178
Motor Set 4 Base Frequency Voltage F179
Motor Set 4 Manual Torque Boost F180
Motor Set 4 Overload Protection Level F181
PM Motor
PM Motor Constant 1 (D-Axis Inductance) F498
PM Motor Constant 2 (Q-Axis Inductance) F499
Step-Out Detection-current Level (For PM Motors) F640
Program Mode Menu Navigation
Primary Menu Sub Menu Parameter Name
Parameter
Number
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net