H9 ASD Installation and Operation Manual 269
H9 ASD Optional Devices
The ASD may be equipped with several options which are used to expand the functionality. Table 23
lists the available options and their functions.
Table 23. H9 Optional Devices and Functions.
Part Identifier Device Name Device Function
ASD-CAB-USB H9 USB Communication Cable
Used to connect the ASD to a PC via the USB port of the
PC.
ASD-EOI-HH-G9 Display Module Docking Station Used to flash the 9-series display module.
ASD-MTG-KIT9 9-Series EOI Remote Mounting Kit Hardware used to mount 9-series ASD EOI remotely.
ASD-TB1-SIM9 ASD Input/Output Signal Simulator Used to simulate the ASD I/O monitor and control signals.
DEV002Z DeviceNet Module
Allows the ASD to communicate via DeviceNet with
other DeviceNet-supported equipment including a host
computer.
ETB003Z Expansion I/O Board 1 Expands the Input/Output functionality of the ASD.
ETB004Z Expansion I/O Board 2 Expands the Input/Output functionality of the ASD.
PDP002Z ProfiBus DP Module
Allows the ASD to communicate via ProfiBus with other
ProfiBus-supported equipment including a host computer.
USB001Z USB-to-Serial Converter
Allows for the USB port of a computer to be used as a
communications port for monitoring and controlling the
ASD.
VEC007Z PG Vector Feedback Board
Allows for the use of Vector Control using a sensor (for
use with a 5-volt encoder).
VEC004Z PG Vector Feedback Board
Allows for the use of Vector Control using a sensor (for
use with a 12-volt encoder).
VEC005Z PG Vector Feedback Board
Allows for the use of Vector Control using a sensor (for
use with a 15-volt encoder).
VEC006Z PG Vector Feedback Board
Allows for the use of Vector Control using a sensor (for
use with a 24-volt encoder).
Note: See the user manual of the applicable option for further information on each item.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
To Next Page
Loading...
