Strata CIX IP5000-series Telephone UG 10/08 105
Administrator Programming 8
Initialising the IP Telephone
CAUTION! If you initialise the IP telephone, all settings return to default.
1. Press
3+6+9+ (simultaneously).
2. Press
Vol ▲.
3. Press
Note Steps 4~6 are optional.
4. Press
FB01 to initialise the telephone’s function settings (LED On = initialise,
LED Off = don’t initialise). See “IP Telephone Function Settings” on page 109 for
details.
5. Press
FB02 to initialise LCD contrast setting (LED On = initialise, LED OFF =
don’t initialise).
6. Press
FB03 to initialise the telephone’s IP network connection settings (LED On =
initialise, LED Off = don’t initialise). See “IP Setup Instructions” for details.
Note When initialising an IP5122-SDC telephone, press FB4 to initialise the local
exchange line setting.
7. Press again to complete the initialisation process.
8. Go off-hook and hang up.
To Next Page
Loading...
