Feature Operations
Speed Dial
Strata CIX IP5000-series Telephone UG 10/08 73
Advanced Speed Dial Operation
Special Characters
SD numbers may include 0~9, #,
*
and Pause. For an example on how to use special
characters, see
page 99.
0~9
0~9
#
End of Speed Dial Number when entering via access code (#66)
*
Escape. “
*
” functions as an escape key indicating that the number immediately
following represents something exceptional. When
*
is used as an escape
character, it consumes one Speed Dial digit. Entering
*
7 to insert a seven-second
pause would use two of 32 characters.
*
(1 ~ 9)
A pause from 1~9 seconds. To pause longer than 9 seconds, enter more pause
escape sequences. Example: To insert a 17-second pause, press
*
9
*
8. A “P”
displays denoting a pause in the SD number. In this example, you would see “PP.”
** *
is entered into the speed dial string.
*
# # is entered into the speed dial string.
Long SD Numbers
Up to 32 digits can be stored in one SD location. If you exceed 32 digits, the excess
digits are automatically stored in the next sequential SD location. If SD 100 contains
40 digits, then 8 of those digits would be stored in SD 101. If you save other digits to
SD101 they will over-write the eight digits automatically stored there.
Table 10Phone Number Dial String Characters
Entry Meaning
To Next Page
Loading...
Need help?
General