Hardware Connections
User Notes
166 Strata CIX IP5000-series Telephone UG 10/08
Any peripheral apparatus connected to the above ports must have the same EN60950
classification. ie.
-SELV ports must only be connected to SELV type ports.
-TNV ports must only be connected to TNV type ports.
TNV3 RCOU/RCOS/RCOUS
For connection to PTO provided Loop Calling
Unguarded Clear exchange lines.
TNV1 RBSU1A/ RBSU2A
2 Cct ISDN2, (TBR3), Basic Rate I/F. For connection to
euro-ISDN services.
TNV1 RBSS1A & RBSS2A
2 Cct ISDN2, (TBR3), Basic Rate I/F. For connection to
approved Euro-ISDN services & devices.
TNV1
RPTU1F/RPTU2F/
BPTU1F
1 ccts ISDN30, (TBR4), primary rate I/F. For connection
to euro-ISDN services.
SELV BIOU1A
Contains various ports for connection of audio paging
amplifiers, dry relay contacts to control external
equipment.
SELV
BIPUM2A/ BIPQ1A/
LIPU-X1A/MIPU16/24
Voice Over IP interface cards. House Ethernet/RS232
ports.
SELV
IES32, GVMU1F,
LVMU2F
Integrated Voice Mail unit. Houses R232 ports.
SELV RRCU1A
Optical interface board for connecting remote cabinets.
SELV
DKT3500/
IPT1020DKT3200/
IPT2000/
DP5000IP5000
Headset ports on any of the range of key telephones.
TNV3 LPFU1A
8 port power failure Transfer Unit for BSTU and RCOU
units.
TNV3
LCNU-C1A, LCNU-
D1A
Passive extender units for CIX product
SELV
LEXU-A, LEXU-B,
LCNU-B1A
Passive extender units for CIX product
Type of Circuit
(EN60950
Classification)
Port Location Port Description
To Next Page
Loading...
