EN-30
16. TURNTABLE RESET FUNCTION
When cooking nished, if the turntable is not at the initial position, it will enter the turntable
reset function. At this time, the lamp, fan and turntable are working, "
" will dynamic
display. After the turntable has reset, the oven stops cooking and reminds cooking is nished.
a
This function only works for one completed cooking. If pause or open the oven door
during cooking, the current cooking cannot enter the turntable reset function.
b
In waitting state, press number key "5" for 3 seconds, there will
be a long "beep" and the turntable reset function is turnned
o. To turn on the turntable reset function, in waiting state
press number key "5" for 3 seconds, there will be a long "beep"
denoting that turntable reset function is released.
NOTE
• Under the reset state, opening the door or “ STOP/Cancel ” button is pressed,
the oven will go back to waiting state.
The function will be reserved after power loss.
17. SCREEN-OUT FUNCTION
a
In standby, click the “STOP/Cancel” key(less than 3 seconds,
and lift the button to respond, because “ STOP/Cancel ” has
already attached 3 seconds long pressing the child lock event,
so you must click and lift to respond) into the black screen save
electricity mode.
b
Under the child lock, click the “STOP/Cancel” key(less than 3
seconds, and lift) into the black screen save electricity mode.
c
Other modes other than the above can not enter the power saving mode, and can not
enter the black screen power saving mode under the opening the door.
•