17
Chapter 1
Setting Up the dynadock™
and Connecting Peripherals
Setting up the dynadock™
This section provides instructions on setting up the dynadock™.
You will need to perform the following steps in the order shown:
1 Install the software
2 Assemble the dynadock™
3 Connect the power adaptor
4 Connect the dynadock™ to your computer
For more information on each step, refer to the appropriate section
below.
Install the software
1 Insert the provided Installation CD into your optical disc drive.
The dynadock™ U3.0 Install Menu appears on your computer
screen.
If the dynadock™ U3.0 Install Menu does not display, follow the
steps provided below for your operating system:
1) Double-click My Computer on your desktop or click Start, and
then Computer.
2) Double-click the DVD/CD drive icon, and then double-click
AutoRun.exe.
Installation files with the latest drivers also available for download at
support.toshiba.com. Check periodically for updates.
To Next Page
Loading...
