24
Setting Up the dynadock™ and Connecting Peripherals
* To use the 5.1 Channel surround sound function, connect the
cable for the audio equipment such as home stereos or speakers to
the 5.1 Channel audio output ports. (See “Adjusting audio settings”
on page 31 for more information.)
If there is no audio device connected to the dynadock™, the
computer's audio ports may remain enabled.
If you make any changes to your audio settings, audio ports and the
dynadock, you may need to restart your media player for those
changes to take effect.
Connecting USB devices
The dynadock™ provides four USB 3.0 ports and two USB 2.0
ports to connect peripheral devices to: two USB 3.0 ports and two
USB 2.0 ports on the back and two USB 3.0 ports on the front.
This section provides basic instructions for connecting most USB
devices to the dynadock™. Please check the documentation that
came with your USB device for any special instructions.
You do not need to turn off the dynadock™ or the docked computer
before connecting a USB device.
5.1 Channel audio output
ports
Home stereos/speakers Surround sound
function *
Use this port: Audio Device: Activity:
To Next Page
Loading...
