20
Setting Up the dynadock™ and Connecting Peripherals
Connect the power adaptor
1 Plug the AC adaptor into the DC-IN on the back of the
dynadock™.
(Sample Illustration) Connecting the AC adaptor to the dynadock™
2 Connect the AC adaptor to a live electrical outlet.
The power light on the front panel glows blue when the
dynadock™ is powered ON.
Connect the dynadock™ to your computer
1 Connect the square end of the provided USB cable into the
USB type B connector on the back of the dynadock™.
2 Connect the other end of the USB cable to an available USB
port on your computer.
Windows
®
automatically detects the device and installs
appropriate device drivers.
The dynadock™ should be connected to a USB 3.0 port for optimal
performance.
The dynadock™ will work when connected to a USB 2.0, but
performance may be compromised.
To Next Page
Loading...
