30
Using the dynadock™ and Adjusting Settings
The dynadock™ supports the following display modes:
Please note the following:
❖ Interlaced modes are not supported.
❖ The display modes listed above may not be supported by your
display, or your display may offer additional modes not
supported by the dynadock™. For information on display
modes supported by your display, be sure to check the
documentation supplied with your display. Select a mode that
both the dynadock™ and your display support.
❖ Placing a display into an unsupported mode for long periods
can damage it.
❖ If you are using Mirror mode to clone the primary display’s
image on an external display, the dynadock™ will attempt to
use the same display mode on the external display that you
selected for the primary display. In some cases, however, this
may not be the most appropriate mode for the mirrored desktop
(for example, if the aspect ratio of the displays is not the same).
In these cases, change the primary display mode to match the
optimum display mode for the external display.
For more information on supported modes, refer to the
documentation supplied with your display.
Resolution Refresh Rates (Hz) Resolution Refresh Rates (Hz)
640 x 480
60, 72, 75, 85
1280 x 960
60, 85
720 x 400
70, 85, 88
1280 x 1024
60, 75
800 x 600
56, 60, 72, 75, 85
1360 x 768
60
832 x 624
75
1366 x 768
50, 60
848 x 480
60
1368 x 768
60
1024 x 768
60, 70, 75, 85
1400 x 1050
60, 75, 85
1152 x 864
75
1440 x 900
60
1152 x 870
75
1600 x 1200
60
1280 x 720
50, 60
1680 x 1050
60
1280 x 768
60, 75, 85
1920 x 1080
50, 60
1280 x 800
60
2048 x 1152
60
To Next Page
Loading...
