32
Using the dynadock™ and Adjusting Settings
2 Select Audio Setup from the menu.
3 On the Playback tab of the Windows
®
sound settings dialog
box, select one of the following:
❖ To use the dynadock's Headphone/Speakers/Line out jack,
select dynadock Audio device.
❖ To use the docked computer's Headphone/Speakers/Line
out jack, select the appropriate playback device (other than
dynadock Audio device).
4 Click Set Default.
5 Click OK.
If you make any changes to your audio settings, you may need to
restart your media player for the audio changes to take effect.
Configuring 5.1 surround sound
1 Click the dynadock U3.0 icon in the system
tray/notification area of your Windows
®
desktop.
(Sample Image) TOSHIBA dynadock™ U3.0 icon
If the icon is not visible in your system tray/notification area, make
sure the dynadock™ is connected and docked, and then click the
Show Hidden Icons button ( ), if necessary, to display hidden
icons.
2 Select Audio Setup from the menu.
To Next Page
Loading...
