4 Replacement Procedures 4.25 LCD unit/FL inverter
9. Peeling off two glass tapes and disconnect the LCD cable and digitizer cable from
the connectors on the back of the LCD unit.
CAUTION: When removing the cables, be careful not to damage the connectors.
10. Remove the LCD unit from the display cover.
Glass tape
LCD cable
Digitizer cable
Glass tape
Figure 4-46 Removing the LCD unit (2)
4-66 [CONFIDENTIAL] PORTEGE M400 Maintenance Manual (960-541)
Get user manuals: See SafeManuals.com
To Next Page
Loading...
