Toshiba Portege M750 - Page 278

4 Replacement Procedures 4.14 Base assembly and Cover assembly
3. Stand the display 90 degrees.
4. Turn the display clockwise 90 degrees and remove the following screws.
• M2.5×10.0B FLAT HEAD screw ×2
5. Remove the hinge rear cover.
M2.5
×
10.0B FLAT HEAD
Hinge rear cover
Figure 4-26 Removing the base assembly and cover assembly (2)
4-44 [CONFIDENTIAL] PORTÉGÉ M700/M750 Maintenance Manual (960-661)