4.14 Base assembly and Cover assembly 4 Replacement Procedures
6. Return the display counterclockwise in the original position, close the display and
turn over the computer.
7. Remove the following screws.
• M2.5×16.0B FLAT HEAD screw ×3 (“16” in the figure below)
• M2.5×6.0B FLAT HEAD screw ×10 (“6” in the figure below)
8. Separate the base assembly and cover assembly.
16
6
6
6
6
6
6
16
6
16
6
6
Base assembly
Cover assembly
6
Figure 4-27 Removing the base assembly and cover assembly (3)
PORTÉGÉ M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 4-45
To Next Page
Loading...
