4.31 Hinge assembly 4 Replacement Procedures
2. Remove the following screws and cable holder.
• M2.5×10.0B FLAT HEAD screw ×2
3. Open the display at the right angle to the palm rest covers and turn the display
clockwise 90 degrees and remove the hinge assembly.
4. Remove the hinge spacer.
M2.5×10.0B FLAT HEAD
Cable holder
Hinge spacer
Hinge assembly
Figure 4-50 Removing the hinge assembly (2)
PORTÉGÉ M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 4-83
To Next Page
Loading...
