4 Replacement Procedures 4.31 Hinge assembly
4-84 [CONFIDENTIAL] PORTÉGÉ M700/M750 Maintenance Manual (960-661)
Installing the Hinge assembly
The following describes the procedure for installing the hinge assembly. (See Figure 4-48
and 4-49.)
1. Set the hinge spacer, hinge assembly and cable holder in place and secure them
with the following screws.
• M2.5×10.0B FLAT HEAD screw ×2
2. Return the display counterclockwise in the original position and close the display.
3. Arrange the cables carefully as shown in the Figure 4-48 to the guides of the cable
holder.
To Next Page
Loading...
