2.16 Fingerprint sensor 2 Troubleshooting
11. Close all applications and power off the computer.
Procedure 3 Authentication of fingerprint
1. Turn on the computer and start up the Windows.
2. In the Windows Log-ON window, scan the fingerprint of your right index finger. Make
sure that scanned fingerprint is displayed on the frame of [Logon Authentication] in red
and you can not log on.
3. In the Windows Log-ON window, scan the fingerprint of your right index finger. Make
sure that scanned fingerprint is displayed on the frame of [Logon Authentication] in green
and you can log on.
PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 2-61
To Next Page
Loading...
