Toshiba Portege R200 - Display Mask

4.23 Display mask 4 Replacement Procedures
4.23 Display mask
Removing the Display mask
To remove the display mask, follow the steps below and refer to Figure 4-30.
1. Peel off the six mask seals and four LCD cushions on the LCD mask and remove the
following screws.
• M2×3.2S FLAT HEAD screw x8 (“3.2” in the figure below)
• M2.5×4S FLAT HEAD screw x2 (“4” in the figure below)
2. Remove the display mask while releasing the latches.
3.2
4
4
3.2
3.2
3.2
3.2
3.2
3.2
3.2
Figure 4-30 Removing the display mask
PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 4-43