Toshiba Portege R200 - Hinge

4 Replacement Procedures 4.25 Hinge
4.25 Hinge
Removing the Hinge
To remove the hinge, follow the steps below and refer to Figure 4-33 to 4-35.
1. Remove the following screws (back) and hinge caps (left and right).
• M2×3C S-FLAT HEAD screw x2
M2×3C S-FLAT HEAD
M2×3C S-FLAT HEAD
Hinge cap
Hinge cap
Figure 4-33 Removing the hinge cap
4-48 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519)