Toshiba Portege R200 - Error Code Check; Procedure 2

2.3 Power Supply Troubleshooting 2 Troubleshooting
Procedure 2 Error Code Check
If the power supply microprocessor detects a malfunction, the DC IN icon blinks orange. The
blink pattern indicates an error as shown below.
 Start Off for 2 seconds
 Error code (8 bit)
“1” On for one second
“0” On for half second
Interval between data bits Off for half second
The error code begins with LSB (Least Significant bit)
Example: Error code 11h (Error codes are given in hexadecimal format.)
PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 2-9