Toshiba Portege R200 - Page 188

3 Tests and Diagnostics 3.27 LAN/Modem/Bluetooth/IEEE1394 Test Program
3-80 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519)
If the DUT machine has any problem or S of the DUT machine is pressed
before connection to tester machine, the following message “INCOMPLETE”
is displayed.
-----------------------------------------------------------------------------
Bluetooth Subsystem T&D for PCSE(CS-Air) VerX.XX Copyright (C) by TOSHIBA Co.
-----------------------------------------------------------------------------
+----------------------+
| DUT | BD_ADDR of the DUT = XXXXXXXXXXXXX [h]
+----------------------+
III N N CCCC OOO M M PPPPPP L EEEEEE TTTTTTT EEEEEEE
I NN N C C O O MM MM P P L E T E
I N N N C O O M M M M P P L E T E
I N N N C O O M M M PPPPPP L EEEEEE T EEEEEEE
I N N N C O O M M P L E T E
I N NN C C O O M M P L E T E
III N N CCCC OOO M M P LLLLLLL EEEEEE T EEEEEEE
Testing is finished
A>
If any problem is detected during the test, the massage FAIL is displayed on
the tester machine with the error code as shown below.
The error code begins with the least significant digit.