4 Replacement Procedures 4.25 Hinge
3. Take out the LCD cable from the hole.
4. Remove the following screws and hinges of the both sides.
• M3×3S BIND screw x2
• M2×4B S-FLAT HEAD screw x2
LCD cable
Hinge
Hinge
M3×3S BIND
M3×3S BIND
M2×4B S-FLAT HEAD
M2×4B S-FLAT HEAD
Figure 4-35 Removing the hinge
4-50 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519)
To Next Page
Loading...
