Recorded TV Allows you to switch to the Recorded TV screen
if the ArcSoft TV 5.0 window is active.
Guide Allows you to switch to the Electronic Program
Guide (EPG) screen if the ArcSoft TV 5.0 window
is active.
Live TV Allows you to switch to the Live TV screen if the
ArcSoft TV 5.0 window is active.
DVD Menu Opens the main menu on a DVD movie, if
available.
Numbers Allows you to select a channel or chapter number
while watching TV, or CD/DVD replay. Numbers,
letters or symbols can be entered.To select a
channel or chapter number of two or more digits,
press the buttons sequentially. For example,
press the "1" button and then the "0" button to
select the number 10.
Clear Deletes entered numbers, letters or symbols.
Teletext Starts or terminates the Teletext mode.
Enter The OK button on the remote controller has the
same functions.
Red, Green, Yellow
and Blue buttons
It jumps to a registration link. These buttons are
not provided with some models.
Using the Remote Controller
Some computers include a remote control unit, which allows you to control
some of your computer’s functions from a distant location.
The remote controller is designed specifically for this computer.
Some application programs may not support remote control functions.
Operational range of the Remote Controller
Point the remote controller at your computer and press a button. The
operational angle and distance are described below.
Distance Within 5 m from the infrared receiver window.
Angle Within a 30 degree horizontal and 15 degree
vertical range of the infrared receiver window.
User's Manual 4-9
To Next Page
Loading...
Need help?
General