Temperature and air volume for the cooling and heating operation can be set as you
prefer. Only air volume can be set if 8°C heating operation is selected.
TEMP.
PRESET
When
PiPi
sounds,
it notices the operation setting returns to the datum point.
Page 7
Cooling, Heating, 8°C Heating,
Dry operation and Fan only operation
Cooling &
Heating
Operation lamp
illuminates
Timer lamp
Operation mode
Cooling/Dry:Bluelightilluminates
Heating:Orangelightilluminates
Defrosting operation while heating
This is not unusual
Frost may cover the heat exchanger of the outdoor unit during the
heating operation. To prevent performance impairment, defrosting
operates automatically. At this time, warm air from the indoor unit
may stop, or water or steam may appear from the outdoor unit.
However, these features are not unusual. Defrosting function may
start immediately after the operation stops.
Steam
Water
Cooling
operation
Dry operation
Heating
operation
Fan only
operation
8°C Heating
operation
12
To Next Page
Loading...
Need help?
General
