Toshiba RAS-10G2KVP Series - Auto Restart Setting

36
Auto Restart Setting
How to set the Auto Restart
1
Press and hold the Temporary switch on the indoor unit for 3 seconds to set the operation
(3“Pi”soundsandOPERATIONlampblinks5times/secfor5seconds).
2 Press and hold the Temporary switch on the indoor unit for 3 seconds to cancel the operation
(3 “Pi” sounds but OPERATION lamp does not blink).
•
In case the ON timer or OFF timer is set, AUTO RESTART OPERATION does not activate.
This product is designed so that after a power failure, it can restart automatically in the same operating mode
as before the power failure.
The product was shipped with Auto Restart function in the off position. Turn it on as required.
3 seconds