Toshiba RAS-10G2KVP Series - Limit maximum Electric and Power consumption; POWER-SELECTION OPERATION

30
8  C
PURE
TEMP.
PRESET
Limit maximum
Electric and Power consumption
This function is used when the circuit breaker is shared with other electrical appliances. It limits
the maximum current and power consumption to 100%, 75% or 50% and can be implemented by
POWER-SELECTION. The lower percentage, the higher Saving and also longer compressor
lifetime.
POWER-SELECTION OPERATION
POWER SEL POWER SEL POWER SEL POWER SEL
[100%] [75%] [50%] [100%]
Notes
•
When the level is selected, PWR-SEL level flashes on remote LCD display for 3 seconds.
Incaseof75%and50%level,number“75”or“50”alsoashesfor2seconds.
•
Due to the reason that POWER SELECTION FUNCTION limits the maximum current,
inadequatecoolingorheatingcapacitymayoccur.