Timer on, Timer off
Start and stop of operation is selected with the time. Operate after setting the current  time on the remote  
control 
 Page 9
  Example of setting
(Selection of timer On/Off)
To start at 6:00 AM and 
stop at 10:00 AM.
To cancel
※ The timer setting is released, but the operation will continue.
1
For timer on   
For timer off  
•
Changes by 10 minutes when pressed once and by 1 hour when pressed    
continuously.
•
The selected time is displayed
Goto2 if the same time as a previous setting can be used.
2
Select   
•
During time off, drying inside is not performed.
•
Timer off can be selected with the previous operation setting even while stopped. 
The operation starts when selected.
•
To change the selected time, press   or   to change the setting.
1
Select operation start for 6:00 AM.
Forward
Backward
Selected time and current operating mode 
blink alternately in the pictographic  
character display portion.
2
Set the stop time to 10:00 AM.
Forward
Backward
Selected time and current operating mode 
blink alternately in the pictographic  
character display portion.
3
18