EasyManua.ls Logo

Toshiba RAS-B10BKVG-E - Accessory Parts

Toshiba RAS-B10BKVG-E
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
ACCESSORY PARTS
ACCESSORY PARTS
Indoor Unit
No. Part name No. Part name
1
Installation Plate × 1
2
Wireless remote control × 1
3
Battery × 2
4
Remote control holder × 1
5
Mounting screw × 6
6
Flat head wood screw × 2
7
Owner’s Manual × 1
8
Installation Manual × 1
Outdoor Unit
No. Part name No. Part name
9
Drain nipple × 1
!
Cap water proof × 2*
* Not require to use for RAS-05, 07, 10, 13BAVG
Air lters
Clean every 2 weeks.
1. Open the air inlet grille.
2. Remove the air lters.
3. Vacuum or wash and then dry them.
4. Reinstall the air lters and close the air inlet grille.
REQUIREMENT OF REPORT TO THE LOCAL POWER SUPPLIER
Please make absolutely sure that the installation of this appliance is reported to
the local power supplier before installation. If you experience any problems or if the
installation is not accepted by the supplier, the service agency will take adequate
countermeasures.
Important information regarding the refrigerant used
This product contains uorinated greenhouse gases.
Do not vent gases into the atmosphere.
Refrigerant type: R32
GWP
(1)
value: 675 * (ex. R32 ref. AR4)
(1)
GWP = global warming potential
The refrigerant quantity is in dicated on the unit name plate.
* This value is based on F gas regulation 517/2014

Related product manuals