Toshiba RAS-B13N3KVP-E - Page 78

– 77 –
(5) Troubleshooting for remote controller
<Primary check>
Check that A or B selected on the main unit is matched with A or B selected on the remote controller.
FILE NO. SVM-12051
Press [ ]
button.
Is transmission
mark indicated?
Press RESET button
on remote control
with tip of pencil.
Is receiver on
indoor unit exposed
to direct sunlight?
Is there any
thyristor fluorescent
light nearby?
Does indoor unit
operate when
moving remote control
near receiver or
indoor unit?
Press
[ ]
button.
Batteries are
exhausted.
Is transmission mark
indicated?
Does indoor unit
beep and operate?
Remote control
is defective.
Does indoor unit
start to operate by
automatic restart
function?
Does radio sound
is af
fected by
remote control when
a signal is transmitted
at distance of 5 cm
from radio?
P
.C. board is
defective.
Keep indoor unit
away from
thyristor
fluorescent light.
A
void direct
sunlight.
Replace
P
.C. board.
Replace
batteries.
Normal
operation
Replace
remote control.
The unit does not beep at all.
OPERA
TION lamp on
indoor unit is not indicated.
NO
YES
YES
NO
NO NO
YES
YES
NO
YES
NO
YES
YES
YES
NO
NO