FILE NO. SVM-12051
– 91 –
No.
Part name
High voltage
generator
Procedures
1) Follow to the procedure in the item
.
2) To remove the air ionizer from the back body,
pull it toward you.
Remarks
2) Secure it using the fixing screws. (2 pcs)
3) Connect the connectors of the high-voltage
generat
4) Attach the air ionizer to the back body.
<How to assemble the high voltage generator>
1) Insert the high voltage generator straight into
the evaporator
voltage generator from the evaporator.
Check whether it is
com
leted inserted.
3) Disconnect the connectors of the high voltage
generator.
4) Remove the fixing screws (2 pcs) and remove
the high voltage generator from the evaporator.
Connector
2 Screws
To Next Page
Loading...