To Next PageTo Next Page
Need help?Do you have a question about the Toshiba RAS-M10 Series and is the answer not in the manual?
General| Type | Split System |
|---|---|
| Series | RAS-M10 |
| Cooling Capacity | 2.5 kW |
| Heating Capacity | 3.2 kW |
| Power Supply | 220-240 V, 50 Hz |
| Outdoor Unit Noise Level | 48 dB |
| Indoor Unit Weight | 9 kg |
Safety guidelines for installing air conditioners using HFC refrigerant (R410A).
Instructions for safely disconnecting the appliance from the main power supply during installation.
Critical safety warnings regarding electrical work, fire, explosion, and gas leaks during installation.
Important warnings about modifying the unit, installation location, and potential hazards.
Cautions regarding water exposure, damage inspection, vibration, noise, and sharp edges.
Lists and details of optional parts required for installation, including piping and insulation.
Guidelines for selecting an appropriate location for the indoor unit, considering space, obstacles, and height.
Recommendations for placing the remote control for optimal signal reception and avoiding interference.
Instructions for drilling holes and mounting the installation plate for the indoor unit.
Requirements for power supply, wiring types, and connection precautions for the air conditioner.
Step-by-step guide for connecting the power cable to the indoor unit, including safety precautions.
Instructions for installing refrigerant pipes and the drain hose, including insulation and bending guidelines.
Procedure for securely attaching the indoor unit to the installation plate on the wall.
Instructions for proper drain hose installation to ensure efficient water drainage and prevent dew-dropping.
Guidance on setting remote control selector switches when installing multiple indoor units.
Instructions on how to switch to TEST RUN (COOL) mode for initial operation checks.
Procedure for separating remote control usage for multiple indoor units installed nearby.
Instructions on how to enable or disable the Auto Restart function after a power failure.
