Toshiba RAS-M13 Series - Remote Control Function; Remote Control Buttons; Operation Modes; Automatic Operation

REMOTE CONTROL FUNCTION
1 Infrared signal emitter
2 Start/Stop button (
)
3 Mode select button (MODE)
4 Temperature button (TEMP.)
5 Fan speed button (FAN)
6 Auto louver button (SWING)
7 Set louver button (FIX)
8 On timer button (ON)
9 Off timer button (OFF)
! Sleep timer button (SLEEP)
" Reserve button (SET)
# Cancel button (CLR)
$ Memory and Preset button (PRESET)
% Automatic operation button (AUTO)
& High power button (Hi POWER)
( Economy button (ECO)
) Quiet button (QUIET)
~ Comfort sleep button (COMFORT SLEEP)
AUTOMATIC OPERATION (AUTO)
To automatically select cooling, heating, or fan only operation and control fan speed and a louver
1. Press .
2. Press : Set the desired temperature.
AUTOMATIC OPERATION (AUTO CHANGEOVER: A)
To automatically select cooling, heating, or fan only operation
1. Press : Select A.
2. Press : Set the desired temperature.
COOLING / HEATING / FAN ONLY OPERATION
1. Press : Select Cool , Heat , or Fan only .
2. Press : Set the desired temperature.
Cooling: Min. 17°C, Heating: Max. 30°C, Fan Only: No temperature indication
3. Press
: Select AUTO, LOW , LOW+ , MED , MED+ , or HIGH .
DRY OPERATION (COOLING ONLY)
For dehumidification, a moderate cooling performance is controlled automatically.
1. Press : Select Dry .
2. Press
: Set the desired temperature.
Hi POWER OPERATION
To automatically control only room temperature, airflow and operation mode for faster cooling or heating operation (except
in DRY, FAN ONLY and ON TIMER mode)
1. Press
: Start and stop the operation.
2. Press : Set the desired temperature.
ECO OPERATION
To automatically control room temperature, fan speed and operation mode to save energy (except in DRY, FAN ONLY and
ON TIMER mode)
1. Press : Start and stop the operation.
Note: Under certain conditions, ECO mode may not provide adequate heating or cooling due to energy saving
features.
TEMPORARY / RESET OPERATION
In case of the misplaced or discharged
remote control
• Pressing the TEMPORARY/RESET button,
the unit can start or stop without using the
remote control.
TEMPORARY button
5
1
3
(
~
#
"
&
4
9
$
)
%
6
7
!
2
8
RESET