Need help?Do you have a question about the Toshiba RAS-M13 Series and is the answer not in the manual?
General| Brand | Toshiba |
|---|---|
| Model | RAS-M13 Series |
| Category | Air Conditioner |
| Language | English |
Covers DANGER, WARNING, and CAUTION points for safe operation and installation.
Explains the meaning of various indicator lights on the indoor unit display panel.
Steps for removing and attaching air filters before operating the unit.
Guide for inserting batteries into the remote and setting the clock.
Instructions on adjusting vertical and horizontal airflow direction using the remote.
Specifies the optimal distance for remote control transmission to the indoor unit.
Details the function of each button on the remote control for various operations.
Automatically selects cooling, heating, or fan operation and controls fan speed and louvers.
Automatically selects cooling, heating, or fan only operation.
Manual selection of cooling, heating, or fan-only modes with temperature and fan speed settings.
For dehumidification, provides moderate cooling performance automatically.
Controls room temperature and airflow for faster cooling or heating.
Controls temperature, fan speed, and mode to save energy.
Allows unit start/stop without the remote control in case of misplacement or discharge.
Setting and cancelling ON and OFF timers for daily operation.
Memorizes and operates preferred settings for future use.
Automatically restarts the conditioner after a power failure.
Operates at super low fan speed for quiet performance.
Saves energy while sleeping by adjusting temperature automatically.
Sets a sleep timer for the OFF timer operation.
Instructions on resetting the filter indicator lamp after cleaning.
Guide for cleaning the indoor unit and remote control with a wet cloth.
Steps for removing, washing, and reinstalling the air inlet grille.
Reduces indoor unit moisture to prevent bad smells, active in Cool/Dry modes.
Describes features like three-minute protection, preheating, warm air, defrosting, and heating capacity.
Details the temperature ranges for heating, cooling, and dry operations for indoor and outdoor units.
Checks for common reasons why the unit may not be functioning, like power or timer settings.
Identifies potential causes for reduced cooling or heating performance.
To Next Page
