Toshiba RAS-M16SMUV-E - Service P.C. Board Selection Information

– 72 –
11-8. Service P.C. Board Selection Information
[4-way air discharge cassette type]
Service P.C. board selection corresponded table (Main P.C. board MCC-5056)
The indoor control P.C. board (MCC-5056) can correspond to multiple models. When replacing P.C. board
assembly, set the DIP switch and jumper according to the following description.
Switch set up
Function details
SW
SW01
SW02
Bit
Bit1-4
Bit1, 2
Bit 3
Bit 4
Function
TS ADJUST
FAN setting
Auto restart
Remote controller
A/B setting
Description
Match to set up
contents of P.C. board
before replacement.
Remarks
OFF: Auto restart is invalid.
ON: Auto restart is valid.
OFF: Remote controller A setting
ON: Remote controller B setting
Status at shipment
from factory
All ON
All OFF
OFF
OFF
Jumper setup
1. J800, J801, J802, J803 : For the following models, set up jumpers according to the table.
¡
: Provided (Original)
×
: None (Cut)
Model name
Part No.
J803
J802
J801
J800
RAS-M10SMUV-E RAS-M13SMUV-E RAS-M16SMUV-E Status at shipment
RAS-M10SMUCV-E RAS-M13SMUCV-E RAS-M16SMUCV-E from factory
¡¡¡¡
¡¡¡¡
¡¡
×
¡
¡
×
¡¡
J803
J802
J801
J800
J803
J802
J801
J800
1
ON
2 3 4
1
ON
2 3 4
FAN 1
FAN 2
RC A/B
RE-
START
SW02 SW01
TS ADJUST
A B
< MCC-5056 >