EasyManua.ls Logo

Toshiba RB-RWS21-E - Display Information; Icon Meanings

Toshiba RB-RWS21-E
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
–5–
Installation Manual
Remote control wiring and inter-unit wiring between remote controllers
Do not allow the wire for the remote controller (communication wire) and the wire for AC220-240 V to come into
contact or put them together in one electrical conduit; otherwise, the control system may have trouble due to noise.
Installation of multiple remote controllers
To install two or more adjacent remote controllers, follow the instructions in the Fig. 1 and 2.
Wiring type VCTF: 0.5 mm
2
to 2.0 mm
2
x 2
Total length of remote control wiring and inter-wiring between
remote controllers
(L+L1)
1 remote controller 2 remote controllers
Up to 500 m Up to 300 m
Indoor
unit
Remote control wiring
L
Remote
controller
Remote
controller
L1
Wall
33 mm or more
(from a wall)
20 mm or more
(when adjacent remote
controllers are installed)
(Fig. 1)
33 mm or more
(from a wall)
20 mm or
more
50 mm or
more
87 mm or
more
50 mm or
more
Wall
(Fig. 2)

Other manuals for Toshiba RB-RWS21-E

Related product manuals