4 Replacement Procedures
Minnesota 10M/10MG Series Maintenance Manual 4-25
4.9 Keyboard
Removing the Keyboard
Before removing the keyboard, remove the battery and any optional devices. Follow the steps
below to remove the keyboard:
1. Open the display panel.
2. Insert a thin tool such as a flat screwdriver into the gap between the strip cover and
keyboard to lever the strip cover up.
Figure 4-23 Removing the strip cover
NOTE: The display panel must be fully open in order to remove the strip cover.
3. Remove the strip cover.
Figure 4-24 Removing the strip cover
To Next Page
Loading...
