4 Replacement Procedures
Minnesota 10M/10MG Series Maintenance Manual 4-55
4.22 MDC Card
Removing the MDC Card
To remove the MDC card, first remove the display assembly, keyboard, and top cover. Then
follow the steps below:
1. Remove the two M2.5x2.5 screws securing the MDC card.
Figure 4-66 Removing the MDC card screws
2. Remove the RJ-11 cable.
Figure 4-67 Removing the RJ-11 cable
3. Remove the MDC Card.
Figure 4-68 Removing the MDC card
To Next Page
Loading...
