EasyManua.ls Logo

Toshiba Strata DK 16 - Page 255

Toshiba Strata DK 16
321 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
SECTION 100-816-600
MARCH 1993
-5-
FIGURE 5
LOCAL MAINTENANCE USING ASCII TERMINAL OR PERSONAL COMPUTER
ROM
AND
RAM
DK8 OR DK16
QSMU (DK8)
— OR —
PIOU
OR
PIOUS
DK16
PPTC ADAPTER
SEE WIRING GUIDE BELOW (TABLE B)
TTY MODULAR JACK
(7-BITS, EVEN PARITY, 1-STOP)
3-PAIR MODULAR CORD
TABLE RM-B
PPTC WIRING FOR LOCAL TERMINAL OR PERSONAL COMPUTER TO TTY CONNECTION
QSMU OR PIOU/PIOUS,
TTY JACK
MODULAR PIN NO.
MODULAR PIN NO.
1
2
3
4
5
6
RD
TD
DSR
DTR
DCD
SG
6
5
4
3
2
1
to
to
to
to
to
to
3
2
6
20
8
7
4 Jumper to 5
RD
TD
DSR
DTR
DCD
SG
RTS to CTS
to
to
to
to
to
to
DB25 PIN NO.
DTE
RS-232
LEAD NAME
PPTC1A-5M ADAPTOR
PPTC (MODULAR TO DB25) ADAPTOR WIRING FOR CONNECTING TTY JACK TO A
LOCAL TERMINAL OR PERSONAL COMPUTER SERIAL COMMUNICATIONS PORT.
RD
TD
DSR
DTR
DCD
SG
PIOU/PIOUS (DK16) so that maintenance and
programming can be administered internally or
externally from desktop personal computers or
terminals connected to Integrated Data Inter-
face Units (PDIU-DIs).
NOTES:
1. An external modem is required for Remote
Maintenance if a QSMU is installed on
DK8, or if an IMDU is not installed on DK16
PIOU or PIOUS. The IMDU has a built-in
maintenance channel for remote
connection; however, an external modem
requires a CO line or standard telephone
port (Figures 2 and 3).
2. The DK16 PIOU or PIOUS can only be
installed in the Expansion Unit.
4 TERMINAL/MODEM INSTALLATION
4.01 DK8 and DK16 provide customers with a
number of Remote Administration and Mainte-
nance configuration options:
A customer-supplied maintenance terminal can
be connected to the system TTY port (DK8
QSMU, or DK16 PIOU or PIOUS) via an exter-
nal modem either locally (Figure 5) or remotely
(Figures 2 and 3).
With the DK16, the IMDU modem (300 or 1200
baud full-duplex) can be connected to the DK16
PIOU or PIOUS to allow system programming
and testing to be accomplished from a remote
location (Figure 4).
Instead of a modem or terminal, a Stand-alone
Data Interface Unit (PDIU-DS) can be con-
nected to the TTY port on the QSMU (DK8) or

Table of Contents

Related product manuals