REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
SECTION 100-816-600
MARCH 1993
-37-
PROGRAM 42-1 ~ 8
PBX ACCESS CODE
ACTIONSTEP DISPLAY/PRINTOUT
1 >MODE PROG
P
Enter Program Mode
At the >MODE prompt, enter P R O G CR.
2 Enter Program Number 42
Press CR.
3 P42 1 NN
Refer to the System Record Sheet and enter the required
PBX group number (1 ~ 8).
System will display present PBX access code.
4
P42 1 NN 9N
5 P42 1 NN 9N
P42 ##
P
To Exit Program/Store Data
A)
B)
C)
P 42
P42
Refer to the System Record Sheet and enter the required
access code.
N = Space
# = Don't care
Example: 9, enter 9 N.
To store data press CR.
Return to step 3 to continue in this program.
To exit this program, press # # CR.
To Next Page
Loading...
