Toshiba Strata DK 16 - Page 286

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
SECTION 100-816-600
MARCH 1993
-36-
TABLE RM-AF
PROGRAM 39
FLEXIBLE BUTTON ASSIGNMENT
ACTIONSTEP DISPLAY/PRINTOUT
1 >MODE PROGEnter the Program Mode
At the >MODE prompt, enter P R O G CR.
2
P 39
P39
Enter the Program Number 39
Press CR.
3
P39 00
4
P39 00#
Press #.
5 P39 00# 01 00
7
To select the next button number, press SPACE.
P39 00# 01 00 01
9
P39 00# 01 00 01
6 P39 00# 01 00 01
Refer to the System Record Sheet and enter the required
feature code (2 or 3 digits).
Example: Code 01, enter 0 1.
P
Refer to the System Record Sheet and enter
the required port number.
Example: Port 00, enter 0 0.
Refer to the System Record Sheet and enter
the button number.
Example: Button 01, enter 0 1.
The system will display the feature code presently
assigned to this button.
02 02
Continue returning to step 6 until all port
00 features are programmed.
A)
B)
02 02
P39 ##
P
Continue returning to step 3 until all Program 39
data has been entered.
To exit this program and store data, press # # CR.
8
Press CR to store data.
P39
NOTES:
1. Program 40, 41: use Type 2 procedure.
Pro
g
ram 42-0: use T
y
pe 1 procedure.2.