Toshiba Strata DK 16 - Page 285

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
SECTION 100-816-600
MARCH 1993
-35-
TABLE RM-AE
PROGRAM 38
DIGITAL AND ELECTRONIC TELEPHONE BUTTONSTRIP TYPE
ACTIONSTEP DISPLAY/PRINTOUT
1 >MODE PROGEnter the Program Mode
At the >MODE prompt, enter P R O G CR.
2 P 38
P38
Enter the Program Number 38
Press CR.
3
P38 00
Refer to the System Record Sheet and enter the
required port number. Example: Port 00, enter 0 0.
4 Press #. The system will display the present
telephone code.
P38 00# 31
P
5 Refer to the System Record Sheet and enter
the required telephone code number.
Example: Code 21, enter 2 1.
P38 00# 31 21
6
P38 00# 31 21
P38 ##
P
To Exit Program/Store Data
A)
B)
C)
To store data, press CR.
Continue returning to step 3 until all Program 38
data is entered.
To exit this program, press # # CR.