Toshiba Strata DK 16 - Page 284

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
SECTION 100-816-600
MARCH 1993
-34-
TABLE RM-AD
PROGRAM 37
RING TRANSFER (CAMP-ON) RECALL TIME
ACTIONSTEP DISPLAY/PRINTOUT
1 >MODE PROGEnter the Program Mode
At the >MODE prompt, enter P R O G CR.
2 P 37
P37
Enter the Program Number 37
Press CR.
3
P37 01
Refer to the System Record Sheet and enter the
required port number. Example: Port 01, enter 0 1.
4 Press #. System will display the present ring transfer
recall time.
P37 01# 064
P
5 Refer to the System Record Sheet and enter
the required ring transfer timeout.
Example: 70 seconds. Enter 0 7 0.
P37 01# 064 070
6
P37 01# 064 070
P37 ##
P
To Exit Program/Store Data
A)
B)
C)
To store data, press CR.
Continue returning to step 3 until all Program 37
data is entered.
To exit this program, press # # CR.